GATE Syllabus 2024: Every year, the Graduate Aptitude Test in Engineering (GATE) is given to engineering students in order to determine their eligibility for admission to the M.E./M.Tech./Ph.D. programs at the IITs, NITs, IIITs, and CFTIs as well as for high-profile positions in PSUs. The GATE Exam Pattern and Syllabus are nearly constant from year to year.
The exam pattern will be updated here if there are any changes. The GATE Exam Pattern includes all pertinent details, including the total number of questions, the number of sections, the kinds of questions presented, and the exam’s grading method.
Graduate Aptitude Test in Engineering
The GATE exam has a 3-hour time limit and a 100-point maximum. To aid you guys in your preparation, we’ll provide comprehensive information regarding the GATE Syllabus and Exam Patterns in this article. Learn more about the GATE 2024 Paper Pattern by continuing to read. The GATE exam is administered nationwide each year by one of the IITs; this year, it is being administered by IISc Bangalore. Three portions make up the exam, the first of which includes questions about engineering, mathematics, and general aptitude (MCQ). Candidates must select one of the 30 subjects from the table below for the questions with numerical answers. The paragraphs below provide a full outline of the syllabus and the exam format.
What is the Syllabus of GATE Exam?
The Graduate Aptitude Test in Engineering (GATE) exam’s syllabus can change a little bit from year to year, but it typically includes a broad range of engineering and science disciplines. Depending on the exam you select from among the several engineering and science subjects for which GATE is held, the syllabus may change. The common subjects covered in GATE are listed below in general:
GATE 2024 Exam Pattern
One of the IITs conducts the Gate paper each year. The exam pattern has not undergone any significant changes. There are only two brand-new disciplines this year. Look at the table for the exam schedule.
| Particulars | Details |
| Examination Mode | Computer Based Test (Online) |
| Duration | 3 Hours |
| Section | General Aptitude (GA) and Candidate Selected Subject |
| Type of Questions | Multiple Choice Questions (MCQs), Multiple Select Questions (MSQ), and Numerical Answer Type (NAT) Questions |
| Design of Questions | Application Analysis and synthesis Comprehension Recall |
| Number of Questions | 10 (GA) + 55 (subject) = 65 Questions |
| Total Marks | 100 Marks |
| Marking Scheme | All of the questions will be worth 1 or 2 marks |
Subjects for GATE Exam
| GATE Paper | Code | GATE Paper | Code |
| Aerospace Engineering | AE | Instrumentation Engineering | IN |
| Agricultural Engineering | AG | Mathematics | MA |
| Architecture and Planning | AR | Mechanical Engineering | ME |
| Bio-medical Engineering | BM | Mining Engineering | MN |
| Biotechnology | BT | Metallurgical Engineering | MT |
| Civil Engineering | CE | Petroleum Engineering | PE |
| Chemical Engineering | CH | Physics | PH |
| Computer Science and Information Technology | CS | Production and Industrial Engineering | PI |
| Chemistry | CY | Statistics | ST |
| Electronics and Communication Engineering | EC | Textile Engineering and Fibre Science | TF |
| Electrical Engineering | EE | Engineering Sciences | XE |
| Environmental Science & Engineering | ES | Humanities & Social Sciences | XH |
| Ecology and Evolution | EY | Life Sciences | XL |
| Geology and Geophysics | GG | Naval Architecture and Marine Engineering | NA |
| Geomatics Engineering | GE |
GATE Syllabus: Subject-Wise topics
| General Aptitude Syllabus (Common for all papers) | |
| Verbal Ability | Numerical Ability |
| Biomedical Engineering Syllabus | |
| Engineering Mathematics | Electrical Circuits |
| Analog and Digital Electronics | Signals and Systems |
| Measurement and Digital Electronics | Sensors and Bioinstrumentations |
| Medical Imaging System | Biomaterials |
| Human Anatomy and Physiology | Biomechanics |
| Aerospace Engineering Syllabus | |
| Fourier Series | Laplace Transforms |
| Numerical methods for linear and nonlinear algebraic equations | Numerical integration and differentiation. |
| Dynamic stability | Euler angle |
| Equations of motion | Aerodynamic forces and moments, stability & control derivatives |
| Decoupling of longitudinal and lateral-directional dynamics | Longitudinal modes; lateral-directional modes. |
| Orbit transfer | In-plane and out-of-plane |
| Elementary ideas of viscous flows including boundary layers | Wind Tunnel Testing |
| Measurement and visualization techniques | Vibration of beams |
| Theory of elasticity | Equilibrium and compatibility equations |
| Airy’s stress function | |
| Agriculture Engineering Syllabus | |
| Engineering Mathematics | Farm Machinery |
| Farm Power | Soil and Water Conservation Engineering |
| Irrigation and Drainage Engineering | Agricultural Processing Engineering |
| Dairy and Food Engineering | |
| Architecture & Planning Syllabus | |
| Architecture and Design | Building Materials, Construction, and Management |
| Building and Structures | Environmental Planning and Design |
| Urban Design | Urban Planning and Housing |
| Planning Techniques and Management | Services, Infrastructure, and Transportation |
| Biotechnology Syllabus | |
| Engineering Mathematics | General Biotechnology |
| Recombinant DNA Technology | Plant and Animal Biotechnology |
| Bioprocess Engineering and Process Biotechnology | |
| Civil Engineering Syllabus | |
| Engineering Mathematics | Structural Engineering |
| Geotechnical Engineering | Water Resources Engineering |
| Environmental Engineering | Transportation Engineering |
| Geomatics Engineering | |
| Chemical Engineering Syllabus | |
| Engineering Mathematics | Process Calculations and Thermodynamics |
| Fluid Mechanics and Mechanical Operations | Heat Transfer |
| Mass Transfer | Chemical Reaction Engineering |
| Instrumentation and Process Control | Plant Design and Economics |
| Chemical Technology | |
| Computer Science and Information Technology (GATE CSE Syllabus) | |
| Engineering Mathematics | Digital Logic |
| Computer Organization and Architecture | Programming and Data Structures |
| Algorithms | Theory of Computation |
| Compiler Design | Operating System |
| Databases | Computer Networks |
| Chemistry Syllabus | |
| Physical Chemistry | Organic Chemistry |
| Inorganic Chemistry | |
| Electronics and Communication Engineering Syllabus | |
| Engineering Mathematics | Networks, Signals, and Systems |
| Electronic Devices | Analog Circuits |
| Digital Circuits | Control System |
| Communication | Electromagnetics |
| Electrical Engineering Syllabus | |
| Engineering Mathematics | Electrical Circuits |
| Electromagnetic Fields | Signals and Systems |
| Electrical Machines | Power Systems |
| Control Systems | Electrical and Electronic Measurements |
| Analog and Digital Electronics | Power Electronics |
| Environmental Science & Engineering (New) | |
| Environmental Management and Sustainable Development | Environmental Chemistry |
| Environmental Microbiology | Water Resources and Environmental Hydraulics |
| Water & Wastewater Treatment and Management | Air and Noise Pollution |
| Solid and Hazardous Waste Management | Global and Regional Environmental Issues |
| Ecology and Evolution Syllabus | |
| Ecology | Evolution |
| Mathematics and Quantitative Ecology | Behavioral Ecology |
| Geology And Geophysics Syllabus | |
| Geology | Geophysics |
| Instrumentation Engineering Syllabus | |
| Engineering Mathematics | Control Systems |
| Electrical Circuits | Analog and Digital Electronics |
| Signals and Systems | Measurements |
| Sensors and Industrial Instrumentation | Communication and Optical Instrumentation |
| Mathematics Syllabus | |
| Calculus | Linear Algebra |
| Rear Analysis | Complex Analysis |
| Ordinary Differential Equations | Algebra |
| Functional Analysis | Numerical Analysis |
| Partial Differential Equations | Topology |
| Linear Programming | |
| Mechanical Engineering Syllabus | |
| Engineering Mathematics | Applied Mechanics and Design |
| Fluid Mechanics and Thermal Science | Material, Manufacturing and Industrial Engineering |
| Mining Engineering Syllabus | |
| Engineering Mathematics | Mine Development Surveying |
| Geomechanics and Ground Control | Mining Methods and Machinery |
| Surface Environment, Mine Ventilation, and Underground Hazards | Mine Economics, Mine Planning, System Engineering |
| Metallurgical Engineering Syllabus | |
| Engineering Mathematics | Thermodynamics and Rate Process |
| Extractive Metallurgy | Physical Metallurgy |
| Mechanical Metallurgy | Manufacturing Process |
| Physics Syllabus | |
| Mathematical Physics | Classical Mechanics |
| Electromagnetic Theory | Quantum Mechanics |
| Thermodynamics and Statistical Physics | Atomic and Molecular Physics |
| Solid State Physics and Electronics | Nuclear and Particle Physics |
| Production and Industrial Engineering Syllabus | |
| Engineering Mathematics | Genera Engineering |
| Manufacturing Processes | Quality and Reliability |
| Industrial Engineering | Operation Research an Operational Management |
| Textile Engineering Syllabus | |
| Engineering Mathematics | Textile Engineering and Fibre Science |
| XE-A (Engineering Mathematics Syllabus) | |
| Linear Algebra | Calculus |
| Vector Calculus | Ordinary Differential Equations |
| Partial Differential Equations | Complex variables |
| Probability and Statistics | Numerical Methods |
| XE-B (Fluid Mechanism Syllabus) | |
| Flow and Fluid Properties | Kinematics |
| Integral analysis | Differential Analysis |
| Inviscid flows | Dimensional analysis |
| Internal flows | Prandtl boundary layer equations |
| XE-C (Material Sciences Syllabus) | |
| Processing of Materials | Characterization Techniques: |
| Structure and Imperfections | Thermodynamics and Kinetics |
| Properties of Materials | Material types |
| Environmental Degradation | Elements of Quantum Mechanics and Mathematics |
| XE-E (Thermodynamics Syllabus) | |
| Basic Concepts | Law of Thermodynamics |
| Thermodynamics Cycle | Thermodynamics Relations |
| Ideal Gas Mixtures | |
| XE-F (Polymer Science and Engineering Syllabus) | |
| Chemistry of high polymers | Polymer Characterization |
| Synthesis and properties | Polymer blends and composites |
| Polymer Technology | Polymer rheology |
| Polymer processing | Polymer testing |
| XE-G (Food Technology Syllabus) | |
| Food Chemistry and Nutrition | Food Microbiology |
| Food Products Technology | Food Engineering |
| XL-P (Chemistry Syllabus) | |
| Atomic Structure and Periodicity | Structure and Bonding |
| s, p and d Block Elements | Chemical Equilibria |
| Electrochemistry | Reaction Kinetics |
| Thermodynamics | Structure-Reactivity Correlations and Organic Reaction Mechanisms |
| XL-R (Botany Syllabus) | |
| Plant Systematics | Plant Anatomy |
| Morphogenesis & Development | Physiology and Biochemistry |
| Genetics | Plant Breeding and Genetic Modification |
| Economic Botany | Plant Pathology |
| Ecology and Environment | – |
| XL-S (Microbiology Syllabus) | |
| Historical Perspective | Methods in Microbiology |
| Microbial Taxonomy and Diversity | Prokaryotic and Eukaryotic Cells: Structure and Function |
| Microbial Growth | Control of Micro-organisms |
| Microbial Metabolism | Microbial Diseases and Host-Pathogen Interaction |
| Chemotherapy/Antibiotics | Microbial Genetics |
| Microbial Ecology | |
| XL-T (Zoology Syllabus) | |
| Animal world | Genetics |
| Evolution | Biochemistry and Molecular Biology |
| Cell Biology | Gene expression in Eukaryotes |
| Animal Anatomy and Physiology | Parasitology and Immunology |
| Development Biology | Ecology |
| Animal Behavior | |
| XH-B1 (Reasoning and Comprehension) (New) | |
| Reading Comprehension | Expression |
| Analytical reasoning | Logical reasoning |
| XH-C1 (Economics) (New) | |
| Statistics, Econometrics and Mathematical Economics | Microeconomics |
| Macroeconomics | International Economics |
| Public Economics | Development Economics |
| Indian Economy | – |
| XH-C3 (Linguistics) (New) | |
| Areal Typology, Universals, Cross-linguistic Features | Language and Linguistics |
| Levels of Grammar and Grammatical Analysis | Historical Linguistics |
| Sociolinguistics | Methods of analysis |
| Applied Linguistics | – |
| XH-C4 (Philosophy) (New) | |
| Classical Indian Philosophy | Contemporary Indian Philosophy |
| Classical and Modern Western Philosophy | Contemporary Western Philosophy |
| XH-C5 (Psychology) (New) | |
| Perception, Learning, Memory, and Forgetting | Cognition: Thinking, Intelligence, and Language |
| Research Methods and Statistics | Psychometrics |
| The biological and evolutionary basis of behavior | Personality |
| Applications of Psychology | Motivation, Emotion, and Stress and Coping |
| Social psychology | Development across the life span |
| XH-C6 (Sociology) (New) | |
| Family, Marriage, and Kinship | Sociological Theory |
| Research Methodology and Methods | Sociological Concepts |
| Agrarian Sociology and Rural Transformation | Indian Society / Sociology of India |
| Social Movements | Sociology of Development |
GATE Syllabus 2024 Topic- Wise Weightage
The official website will publish the GATE Syllabus 2024 along with the GATE 2024 notice. Candidates can consult the provided table to see how each topic is weighted.
GATE Syllabus 2024 for CSE (Computer Science)
| ATE Syllabus 2024 for CSE (Computer Science) | |||
| Topic | Expected Weightage in % | Topic | Expected Weightage in % |
| Theory of Computation | 7.5 | Operating System | 9 |
| Compiler Design | 2.75 | General Aptitude | 15 |
| Computer Organization & Architecture | 9 | Computer Networks | 7.5 |
| Programming & Data Structures | 10.5 | Soft. Engg/ Web Technology | 1.5 |
| Algorithms | 8 | Engineering Maths | 14.75 |
| Digital Logic | 5.25 | Database | 7.5 |
GATE Syllabus 2024 for Mechanical Engineering
Candidates taking the GATE 2024 Mechanical Engineering exams should consult the GATE 2024 curriculum to determine what subjects to focus on. Following that, candidates can see the weighted scores in the table below.
| GATE Syllabus 2024 for Mechanical Engineering | |||
| Topic | Expected Weightage in % | Topic | Expected Weightage in % |
| Engineering Mechanics | 2.5 | Thermodynamics | 12.75 |
| Strength of materials | 7.75 | Refrigeration & Air Conditioning | 1.25 |
| Heat Transfer | 6 | General Aptitude | 15 |
| Machine Design | 3.75 | Industrial Engineering | 8 |
| Fluid Mechanics | 7.5 | Engineering Maths | 12.25 |
| Theory of Mechanics | 9 | Manufacturing Engineering | 14.25 |
GATE Syllabus 2024 for Electrical Engineering
The topics covered in the GATE Electrical Engineering syllabus 2024 are those that must be studied in order to pass the GATE test in 2024. The GATE syllabus for Electrical Engineering in 2024, along with the anticipated weightage %, is provided below.
| GATE Syllabus 2024 for Electrical Engineering- Topic- Wise Weightage | |||
| Topic | Expected Weightage in % | Topic | Expected Weightage in % |
| Network Theory | 11.75 | Analog & Digital Electronics | 11.25 |
| Signal & System | 8.5 | EMT | 2.75 |
| Control Systems | 9 | General Aptitude | 15 |
| Power Systems | 9.75 | Engineering Maths | 11.75 |
| Electrical machines | 8.25 | Power Electronics | 7.5 |
| Electrical & Electronics Measurements | 4.5 | ||
GATE Syllabus 2024 for Instrumentation Engineering
Candidates who plan to take the GATE Instrumentation Engineering paper should review the GATE Syllabus 2024 with Weightage to learn about the crucial subjects. Check the table below for the topic-specific weighting scores.
| GATE Syllabus 2024 for Instrumentational Engineering- Topic Wise Weightage | |||
| Topic | Expected Weightage in % | Topic | Expected Weightage in % |
| Analog circuits | 11.75 | Circuits & Networks | 10.25 |
| Measurements | 6.25 | General Aptitude | 15 |
| Communications | 1.5 | Signals and Systems | 7.75 |
| Control System | 10.75 | Transducers | 12.25 |
| Digital Circuits | 7 | Engg Maths | 11.75 |
| Analytical Biomedical & Optical Instrumentation | 4.25 | Process Controls | 1.5 |
GATE Syllabus 2024 for Civil Engineering
Candidates can check the Topic wise weightage in percentage for Civil Engineering below.
| GATE Syllabus 2024 for Civil Engineering | |||
| Topic | Expected Weightage in % | Topic | Expected Weightage in % |
| SOM | 7.75 | Design of Steel Structures | 4.25 |
| Structural Analysis | 3.5 | Highway & Surveying | 12 |
| FM and Hydraulic machine | 6.75 | Engineering Mathematics | 12.25 |
| Irrigation & Hydrology | 7.75 | General Aptitude | 15 |
| RCC and Prestressed concrete | 6.5 | Environment Engg | 9 |
| Geo-Technical | 15.25 | ||
GATE Syllabus 2024 for Electronics and Communication Engineering
Candidates can concentrate on key subjects and do well on the GATE 2024 Exam. Check the article below for the Expected Weightage.
| GATE Syllabus 2024 for Electronics and Communication Engineering | |||
| Topic | Expected Weightage in % | Topic | Expected Weightage in % |
| Network Theory | 11.25 | Communication Systems | 10.75 |
| Electronics Devices & Circuits | 7.25 | EMT | 9.5 |
| Digital Circuits | 6 | Engineering Maths | 10.5 |
| Signal & Systems | 9 | General Aptitude | 15 |
| Analog Circuits | 11.75 | Micro Processors | 1.5 |
| Control Systems | 9 | ||
Also Check:
- With the aid of our effective notifications and updates, “Stay informed and never miss a chance at All India Latest Jobs.“
- Previous year’s questions Papers from All India Government Exams are a valuable resource for candidates and offer priceless insights into exam formats.
- “The succinct table that follows lists desired positions in the federal government and state governments:”
